In the concrete jungle of New York, we’re quick to call out the posers from the true shredders, and nothing gets more heat than mismatched gear. Choosing the right board and kicks is pivotal, as highlighted in our rundown of the top street decks or the sickest sneakers for skateboarding. Why all the fuss about skateboarding attire and gear? We’ll dive into the essentials of skateboard maintenance you absolutely need to know.
Key takeaways
- Regular inspections prevent major issues and extend your skateboard’s lifespan.
- Cleaning and maintenance can dramatically improve performance and safety.
- Mastering DIY skateboard repairs enriches your skating experience and saves you money.
How to repair your skateboard
Bringing your skateboard back to life isn’t just about keeping it looking fresh; it’s about ensuring each session is as smooth as the last. To bail without fail, maintaining your deck is key. Whether it’s a worn-out wheel or a busted bearing, I’ll break down the repair steps skate park legends swear by.
If you are a visual learner, check out this video titled ’10 Skateboard Problems That Need To Change #Shorts’
Step 1: Inspect your skateboard
First things first, give your board a thorough once-over. Identify what parts are suffering – could be chipped decks, shaky trucks, or spun-out wheels. This preventive care not only saves your ride but could also save you from taking a nasty slam.
Step 2: Remove skateboard parts
Next up, disassemble with care. Use the right skate tool to remove trucks from the deck and wheels from the trucks. Keep your hardware sorted – confusion here could throw a wrench in the whole operation later on.

Step 3: Clean bearings and wheels
Cleaning time – grime’s the enemy of that crucial spin. Pop out the bearings from the wheels. For a top-tier clean, dipping bearings in solvent followed by a lube job can bring back that buttery roll.
Wheels scrub up well with soapy water and a brush.
Step 4: Assess and replace grip tape
Look at the grip tape for any telltale signs of wear. If it’s more smooth than grippy, it’s time to peel and stick on a fresh layer. Doing this right means a surface that’ll keep you attached to your board like glue.
Step 5: Refit or replace skateboard parts
Damage found during inspection dictates whether you’re refitting or heading to shop for replacements. Trucks can usually be tightened or tweaked back to prime condition. If it’s time to opt for fresh gear, make sure you align with those street-tested skateboard trucks or wheels that suit your style.

Step 6: Reassemble your skateboard
All cleaned and replaced? Let’s reassemble. Start with the trucks, securely fastening them to the deck.
Wheels snap back onto the trucks, bearings nestled inside. Remember, it’s snug but don’t go King Kong tight – you want those wheels spinning free, not squealing for mercy.
Step 7: Perform a safety check
Just before you hit the streets, give your board a final safety check. Loose parts are a no-go, and uneven wear could send you sprawling. A solid once-over ensures you’re ready to roll without a hitch, and believe me, your confidence will thank you.
Bones REDS Skateboard Bearings
- High-speed
- Pre-lubricated
- Inexpensive
I may earn a commission if you make a purchase at no additional cost to you.
More repair tips
Rolling through the city, you’ll pick up more than just stories. Dust, crud, and all sorts of grime come home with you and your board. Maintain that fresh-off-the-wall condition with these slick tips that go beyond tightening your nuts and bolts.
- Regularly check your hardware for signs of rust or wear, especially if you shred through all seasons.
- Keep a skate tool handy. It’s the Swiss Army knife for skateboarders and a lifesaver when things go south.
- Learn the sounds of your skateboard; a healthy board sounds as sweet as a city symphony.
- Don’t ignore the trucks. They might need a bit of loosen or tighten action to perfect those pivots and turns.
- Rotate your wheels from time to time. It ensures even wear and prolongs wheel life – crucial for consistent performance.
When it comes to upkeep dos and don’ts, the details matter. Small habits can lead to big payoffs in durability and shred-ability.
Do | Don’t |
---|---|
Use lubricant designed for skateboard bearings | Soak bearings in water or harsh cleaners |
Wipe down your board after skating in damp conditions | Ignore cracks or chips in your deck |
Tighten all nuts to their appropriate tension | Over tighten and strip screws |
Check wheel spin regularly for smooth rides | Keep skating on flat-spotted wheels |
Store your skateboard in a dry place | Leave your board outside or in a car |
This table shows the cardinal rules to keep your ride in top shape and ready to tear up the asphalt.
Advantages and disadvantages of repairing your skateboard
Repairing your board can seem like a chore but trust me, it’s worth way more than the elbow grease you put into it. Taking a wrench to your ride not only saves cash but you’ll bond with your board on a whole new level. Here’s the lowdown on the pros and cons.
Advantages
- You extend the life of your skateboard, saving money in the long run.
- Personal satisfaction from DIY repairs boosts your skating confidence.
- Understanding your board’s mechanics can improve your skating technique.
- Custom tweaks mean a ride tailored to your style and preferences.
Disadvantages
- Beginners may find the learning curve steep – skateboard anatomy can be complex.
- Repairing your skateboard can be time-consuming if you’re a busy city skater.
- Without proper tools or know-how, you could do more harm than good.
- Some parts may be hard to come by, depending on your board’s brand or model.
“Maintaining your board isn’t just about keeping it looking slick; it’s about ensuring top performance every time your wheels kiss the pavement. It’s about saving you from a sketchy slam that could sideline you and your skate dreams.”
In my opinion, as someone who’s still got plenty to learn about the technical side of skateboarding, the whole repair process can be sort of meditative. There’s something cool about taking the time to get to know your board piece by piece, to respect the wood and metal that takes all the beatings from the street. And hey, if we’re being real, there’s an undeniable rush when you nail a repair and feel that smooth ride under your feet.
You’re not just a skater; you’re a skilled board mechanic. If you’ve ever transitioned from ratty sneakers to the confidence-boosting swagger of the best skate shoes, you know the difference good gear makes. Same goes for a well-maintained board.
Sure, leaving it to a pro at the skate shop is tempting – they’ve got the tools and the know-how. But dig this: when you learn to sort your own setups and fixes, you’re earning stripes in the skate community. It’s more than just skating; it’s respecting the craft, understanding every bolt and bearing that elevates your ride.
Plus, let’s face it, dropping knowledge about your board’s innards is a surefire way to earn nods of respect at the park.
Frequently asked questions (FAQ)
How usually should I replace my skateboard bearings?
When you start to notice your rolls getting sluggish or your bearings making sounds louder than the city streets, it’s time to consider a swap. Usually, this comes down to every few months, depending on how hard and usually you skate.
Can I repair a cracked skateboard deck?
While minor cracks might be patched up for a short-term fix, a cracked deck is a ticking time bomb. For the sake of safety and performance, invest in a new deck. You don’t want it snapping when you’re mid-trick!
Is it worthwhile to learn skateboard repair as a beginner?
Absolutely. Getting into the nuts and bolts of your board deepens your understanding of the sport. Plus, learning to DIY repairs can save you cash and trips to the skate shop, which means more time learning new tricks and less time waiting for someone else to fix your setup.
Final thoughts
As we wrap this up, just know that repairing your skateboard isn’t some mundane chore; it’s an essential skill for any dedicated skater. In the streets of New York or wherever you’re pushing wood, personal maintenance of your ride speaks volumes about your passion and dedication to the craft. Just like a musician with their instrument, knowing every inch of your skateboard will only deepen the bond between you and your board.
Stay dedicated, give your deck the TLC it deserves, and it will never fail to carry you through the next challenge.
Have any of these tips helped tighten your setup or given your bearings a new lease on life? Did I cover everything you wanted to know? Let me know in the comments section below I read and reply to every comment. If you found this article helpful, share it with a friend, and check out my full blog for more tips and tricks on skateboard repair and care. Thanks for reading and keep shredding the gnar!